The Netgear EAX20 mesh extender AX1800 is designed to provide exceptional WiFi strength, high-speed connectivity, and increased coverage via the new generation WiFi 6 standard. All that remains is to complete the Netgear EAX20 Setup and enjoy a more connected home. With the AX1800 EAX20 WiFi extender, you can enjoy up to 1.8 Gbps WiFi speeds in even the most dead end of your home.
Both of your wired devices will benefit from the mesh extender’s four-stream WiFi and additional spatial streams, which provide more usable bandwidth and reduce congestion. The EAX20 Extender is appropriate for households of medium size.
You can easily learn how to configure the Netgear EAX20 AX1800 WiFi range extender here. Let us begin this party.
Manual Setup of Netgear EAX20 AX1800
When you acquire a new Netgear EAX20 AX1800 mesh Extender, a manual is included in the box. This Netgear EAX20 Manual takes you step by step through the setup process. Simply read the instructions in the Netgear EAX20 Setup manual to configure the Netgear EAX20 AX1800 Extender.
On the other side, non-technical users may struggle to comprehend these installation instructions. Contacting our professionals is the ideal option to instal your Netgear EAX20 AX1800 WiFi extender quickly and efficiently. They will assist you through each step of the process to ensure that your extender is properly configured.
Netgear EAX20 Setup through WPS
Follow these procedures to configure the Netgear EAX20 AX1800 through the WPS push button:
- Connect the EAX20 AX1800 dual-band WiFi mesh extender to a power source.
- The WiFi router and extender should be located in the same room.
- Until the job is complete, connect your extender to an electrical socket.
- Wait for the orange light on theNetgear EAX20 Power LED to turn on.
- Press the WPS button on the extender.
- If the Netgear EAX20 Setup LED glows white, the connection between your router and extender is good.
- Adjust the extender’s location.
- Bring your WiFi-enabled computer or mobile device to a location with limited WiFi coverage.
- Connect your WiFi-enabled computer or mobile device to the Extender network.
That concludes the Netgear EAX20 Setup with the WPS button. Kindly contact our technical support team if you encounter any technical difficulties during the configuration procedure.
Manual Setup of the EAX20 4-Stream WiFi Mesh Extender Method
Manually configure the AX1800 4-stream WiFi mesh extender by following the steps below:
- Connect to the internet with your Netgear AX1800 dual-band WiFi mesh extender model EAX20.
- Locate the WiFi extender in close proximity to your router.
- Connect the extender to a power source thereafter.
- Wait until the green Power LED illuminates.
- Press the Power button if the Power LED does not illuminate.
- Connect your Netgear EAX20 WiFi range extender via a WiFi or Ethernet connection.
- Type mywifiext.net into a web browser on a device like computer or mobile phones.
- If mywifiext.net does not work on your computer, contact our specialists immediately for assistance.
- The Netgear EAX20’s login screen appears.
- Connect your extender to an existing WiFi network by following the on-screen directions.
- Adjust the extender’s location.
- If you experience connectivity issues, move the extension closer to the router and retry before the Connection Status LED turns white.
- After locating the ideal location for your extender, connect your client PCs to the extender’s WiFi network.
- If you’re still having difficulties configuring your Netgear EAX20 AX1800 Extender, contact our highly skilled professionals.
Firmware Update for Netgear EAX20 | AX1800
Is your WiFi extender behaving strangely? Is it unable to get the required speed despite a properly configured Netgear WiFi extender? If this is the case, you can update the firmware on your Netgear extender immediately.
The following steps describe how to upgrade the firmware on a Netgear EAX20:
- To begin, ensure that your AX1800 WiFi extender is powered on.
- Connect the extender to your router using a network cable.
- After that, open your web browser of choice.
- Enter mywifiext.net in the address bar.
- Log in to your EAX20 using the username and password.
- To do a firmware upgrade, search for a setup menu and there you find Firmware Upgrade.
- Following that, click the next button.
- If a new firmware version is available, choose yes to upgrade the firmware on the Netgear EAX20 AX1800.
- Allow time for the firmware upgrade of the Netgear extender AX1800 setup to complete correctly.
This brings our conversation to a close. Your extender’s firmware has been modified. Please do not hesitate to contact our specialists if you run into any difficulties.
Read more blogs on Zoobledigital