Are you planning to install your driveway and trying to source B&Q resin bonded gravel and the other supplies? If yes, before you start sourcing the required supplies, you need to understand a few important factors so that you are able to install good quality resin driveways. The key to successful installation of a resin driveway lies in the preparation. If you do not make adequate preparation the quality of your driveway will be affected. If the quality of the new driveway you install is not good then it will not last as long as it should. In other words, you will not get the best value for your money. Let us explore further on the preparation required for your driveway.
When you are installing Resin Bound Pathways or driveways it is important that the base is firm. As a part of the preparation, you need to prepare a firm base. In case you are installing your driveway on an existing driveway, then you do not have to worry about the base because you are likely to have a firm base and you just need to work on the existing base. On the other hand, if you are installing a fresh new driveway, you will not be able to install the resin paving directly but you should first pave a solid base and pave your resin driveway on the newly installed firm base. In case you are laying the base you need to wait for the base to set and firm up. This needs careful planning. Depending on the material you use to install your base, the setting time will vary. You need to schedule your resin driveway installation accordingly.
In case you are going to install your resin driveway on an existing driveway, you will have to ensure that the base is levelled properly. If the base is not levelled then the material consumption will be high. In some places the resin driveway thickness will be more and in other places it would be thin. This could result in faster damage in the thinner areas. So, take all these factors into consideration when you are getting ready for the installation of your resin driveway.
Once the base is prepared adequately, you need to physically measure the area so that you can source adequate quantity of the driveway. Each brand will have a different coverage per unit. You need to take into consideration such factors as well when sourcing the resin driveway supplies or else you could end up with excess material or run short of material when paving your driveway. All these are important aspects of your driveway preparation. Take your time get ready with the required preparation and plan to install your driveway on a bright day. Do not forget to check the weather forecast because you do not want to start on a wet day which could disrupt the driveway installation process and affect the quality of the driveway.